How to Make Your Own Dog Mask – The Basics

In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques which you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the backyard and other regions of the house, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup that will look a little scary at first, but it’s actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so you get something that resembles a cone. The main thing here is to be realistic with what type of paper plate that you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so that you can make certain that nothing will leak once you place the mask on. Be sure the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You will want to start with one side of the mask first, so that you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everyone! It’s also a good idea to wash away any excess paint once you are done, so that you don’t wind up with smudges or smears on your dog.

Then it’s time to glue the mask on your dog’s head. First you will need to make sure that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it is secure, then you may start to glue the mask http://shop.ananaya.com/finding-the-best-cheap-dog-food/ on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Make certain it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged firmly onto the surface of your dog. Do not make the folds too big or else it might look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain that the ears are level and make certain it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask as your dog protection, you will have to do some sanding to make certain it’s safe on your dog. You can accomplish this by sanding off any excess paper which might have been removed from your mask.

Leave a Reply